|
Navigation
|
 |
High Temp MSDS
| SECTION 1: IDENTIFICATION |
Catalog No. (N/A) |
| |
|
| Product Name: |
Black Velvet Heat Resistant Paint |
| Manufacturer Name: |
POR-15, Inc. |
| General Use: |
Hi Temp Paints |
| Product Description: |
Silicone Alkyd |
| Address: |
P.O. Box 1235 |
| |
Morristown NJ 07962-1235 |
| Email: |
support@por15.com |
| Business Phone: |
(800) 457-6715 |
| Business Fax: |
(973) 887-8007 |
| Emergency Phone: |
(973)-887-1999 |
| For information |
|
| in North America, call: |
(800) 457-6715 |
| CHEMTREC Numbers: |
| For emergencies in the US, call CHEMTREC: 800-424-9300 |
| For emergencies outside US, call INTERNATIONAL: (703)527-3887 |
| Manufacturer MSDS Revision Date: |
07/02/2008 |
| Trade Names: |
POR-15 Black Velvet HRP |
| Chemical Family: |
Alkyd |
| NFPA |
| Health: |
3 |
| Flammability: |
2 |
| Reactivity: |
1 |
| Other: |
|
| HMIS |
| Health Hazard: |
3 |
| Fire Hazard: |
2 |
| Reactivity: |
1 |
| Personal Protection: |
|
| Physical Description / Properties |
| Physical State/Appearance: |
Liquid |
| Color: |
Medium Gray |
| Odor: |
Light Aromatic |
| Vapor Pressure: |
3.9 PSIA @ 163° |
| Vapor Density: |
5.00 (Air = 1) |
| Flash Point: |
42.2°C (108°F) |
| Auto Ignition Temperature: |
246°C (475°F) |
| Upper Explosive Limit: |
6% |
| Lower Explosive Limit: |
0.77 |
| Boiling Point: |
155 - 196 °C (312 - 385 °F) |
| Melting Point: |
Not Applicable |
| Solubility: |
Negligible In Water |
| Specific Gravity: |
0.9076 (Water = 1) |
| Volatile Organic Compound Content: |
2.33 lbs/gal (270 grams/liter) |
| Viscosity: |
250-500 CPS @ 25°C (77°F) |
| Molecular Formula: |
Mixture |
| Molecular Weight: |
Varies |
| Chemical Name |
CAS# |
Lower Percent |
Upper Percent |
|
|
| Insoluble pigment* |
No data |
|
|
| Naptha Petroleum |
6833-23-3 |
|
|
| |
*This insoluble pigment is a result of a high temperature chemical reaction of Manganese Oxide, Iron Oxide, and Silicone Dioxide. |
|
| SECTION 2 : HEALTH HAZARD INFORMATION |
Catalog No.: (N/A) |
| Emergency Overview: |
Hazardous according to criteria of Worksafe Australia |
| Applies to All Ingredients: |
| Potential Health Effects: |
| Eye Contact: |
HUMAN EFFECTS & SYMPTOMS OF OVEREXPOSURE:
May cause severe irritation. |
| Skin Contact: |
HUMAN EFFECTS & SYMPTOMS OF OVEREXPOSURE:
May cause irritation. |
| Inhalation: |
HUMAN EFFECTS & SYMPTOMS OF OVEREXPOSURE:
Excessive inhalation may cause irritation to nose, throat, lungs. |
| Ingestion: |
HUMAN EFFECTS & SYMPTOMS OF OVEREXPOSURE:
May be harmful if swallowed; irritation of mouth, pharynx, esophagus and stomach may develop following ingestion. |
| Carcinogenicity: |
Potential Carcinogens: None |
| OSHA Designation: |
No |
| NTP Designation: |
No |
| IARC Designation: |
Monographs: No |
| Aggravation of Pre-Existing Conditions: |
None Known |
|
| Eye Contact: |
Immediately flush eyes with plenty of water for 15 to 20 minutes occasionally lifting eyelids. Get medical attention, if irritation or symptoms of overexposure persists. |
| Skin Contact: |
Immediately wash skin with plenty of soap and water for 15 to 20 minutes, while removing contaminated clothing and shoes. Get medical attention if irritation develops or persists. Wash contaminated clothing thoroughly before re-use. |
| Inhalation: |
If inhaled, remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Seek immediate medical attention if necessary. |
| Ingestion: |
If swallowed, do NOT induce vomiting. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person. Give one or two glasses of water to drink and refer to medical personnel. |
| Naptha Petroleum : |
| Insoluble pigment* : |
| SECTION 3 : PRECAUTIONS FOR USE |
Catalog No.: (N/A) |
| Engineering Controls / Personal Protection / Flammability |
| Engineering Controls: |
Use appropriate engineering control such as process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. |
| Ventilation System: |
Use in well-ventilated areas only. Have adequate general exhaust. |
| Skin Protection Description: |
Cover as much of the exposed skin area as possible with appropriate clothing. If skin creams are used, keep the area covered to a minimum. |
| Hand Protection Description: |
Wear appropriate protective gloves. Consult glove manufacturer's data for permeability data. |
| Eye/Face Protection: |
Wear appropriate protective glasses or splash goggles as described by 29 CFR 1910.133, OSHA eye and face protection regulation, or the European standard EN 166. Contact lenses should not be worn. |
| Respiratory Protection: |
A NIOSH approved air-purifying respirator with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, spray painting, or any other circumstances where air purifying respirators may not provide adequate protection. |
| Other Protective: |
Self-contained breathing apparatus if threshold limit is exceeded. Eyewash and deluge shower should be available. |
| |
|
| Ingredient Guidelines |
| Ingredient: Insoluble pigment* |
| Guideline Type: |
OSHA PEL-TWA |
| Guideline Type: |
ACGIH TLV-TWA |
| Guideline Type: |
Australian Exposure Standard |
Ingredient: Naptha Petroleum
| Guideline Type: |
OSHA PEL-TWA |
| Guideline Type: |
ACGIH TLV-TWA |
| Guideline Type: |
Australian Exposure Standard |
|
| SECTION 4 : SAFE HANDLING INFORMATION |
Catalog No.: (N/A) |
| Handling: |
Keep away from heat, sparks, open flame; use with adequate ventilation. Avoid prolonged or repeated contact. |
| Storage: |
Store in tightly closed containers to prevent moisture contamination. Do not reseal if contamination is suspected. Ideal storage temperature range for ease of handling is 50-81 deg F (10-27 deg C). Avoid contact with skin and eyes.
SHELF LIFE: 6 months-2 years (unopened can) @ 77 deg F (25 deg C)
Store in tightly closed container and protect from moisture and foreign materials. At maximum storage temperatures noted, material may slowly polymerize without hazard. Ideal storage temperature range is 50-81 deg F (10-27 deg C). |
| |
SPECIAL SENSITIVITY (Heat, light, moisture): If container of material is exposed to heat, container can pressurize and burst. If moisture enters container, pressure can build up due to reaction producing carbon dioxide, which can cause sealed container to pressurize and burst. Do not reseal if contamination is suspected. |
|
| Chemical Stability: |
Stable under normal conditions |
| Conditions to Avoid: |
Sparks, open flame, fire. |
| Incompatibilities with Other Materials: |
Oxidizing agents like bleach, hydrogen peroxide. |
| Reactivity: |
Non-reactive in water |
| Hazardous Polymerization: |
None under normal conditions. |
| |
|
| DOT Shipping Name: |
Paint |
| DOT UN Number: |
UN1263 |
| DOT Hazard Class: |
3 |
| DOT Packing Group: |
III |
| Spill Cleanup Measures: |
Provide ventilation and respiratory protection if required. |
| Waste Disposal: |
Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous waste prior to disposal. Furthermore, consult with your state and local waste requirements or guidelines, if applicable, to ensure compliance. Incineration is preferred. Arrange disposal in accordance to the EPA and/or state and local guidelines. Triple-rinse drum prior to offering for recycle. |
| Fire: |
Combustible liquid. At elevated temperatures, vapors can form an ignitable mixture with air. Vapors can flow along surfaces to distant ignition sources and flash back. |
| Flash Point: |
42.2°C (108°F) |
| Flash Point Method: |
TCC |
| Upper Flammable or Explosive Limit: |
6% |
| Lower Flammable or Explosive Limit: |
0.77 |
| Auto Ignition Temperature: |
246°C (475°F) |
| Extinguishing Media: |
Dry chemical (e.g. monoammonium phosphate, potassium sulfate, and potassium chloride), carbon dioxide, high expansion (proteinic) chemical foam, sand. |
| Protective Equipment: |
As in any fire wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. |
| NFPA |
|
| Health: 3 |
Flammability:2 |
| Reactivity:1 |
Other: |
| |
HAZARD CLASS: B |
|
