|
Navigation
|
 |
HARDNOSE PAINT ACCELERATOR/HARDNER
MSDS INFORMATION SHEET
|
SECTION 1: IDENTIFICATION
|
Catalog No. (N/A)
|
| |
|
|
Product Name:
|
Accelerator/Hardener
|
|
|
Manufacturer Name:
|
POR-15, Inc.
|
|
|
Address:
|
P.O. Box 1235
|
|
|
|
Morristown NJ 07962-1235
|
|
|
Email:
|
support@por15.com
|
|
|
Business Phone:
|
(800) 457-6715
|
|
|
Business Fax:
|
(973) 887-8007
|
|
|
Emergency Phone:
|
(973)-887-1999
|
|
|
For information
|
|
|
|
in North America, call:
|
(800) 457-6715
|
|
|
CHEMTREC Numbers:
|
|
|
For emergencies in the US, call CHEMTREC: 800-424-9300
|
|
|
For emergencies outside US, call INTERNATIONAL: (703)527-3887
|
|
|
Manufacturer MSDS Revision Date:
|
07/02/2008
|
|
|
|
Physical Description / Properties
|
|
|
|
|
|
Vapor Pressure:
|
5.9 PSIA @ 163*
|
|
|
Vapor Density:
|
3.70 (Air = 1)
|
|
|
Flash Point:
|
51.1°C (124°F)
|
|
|
Auto Ignition Temperature:
|
246°C (475°F)
|
|
|
Upper Explosive Limit:
|
7%
|
|
|
Lower Explosive Limit:
|
1%
|
|
|
Boiling Point:
|
140°C (284°F)
|
|
|
Specific Gravity:
|
1.02 (Water = 1)
|
|
|
Percent Volatile:
|
26% By Volume
|
|
|
Molecular Formula:
|
Mixture
|
|
|
Molecular Weight:
|
Varies
|
|
|
|
Ingredients
|
|
|
|
|
|
Chemical Name
|
CAS#
|
Lower Percent
|
Upper Percent
|
|
|
|
Aromatic Solvent
|
68333-23-3
|
|
|
|
1,6-Hexamethylene Diisocyanate based Polyisocyanate
|
28182-81-2
|
|
|
|
Ethyl 3-ethoxypropionate
|
000763-69-9
|
|
|
|
Xylene
|
1330-20-7
|
|
|
|
|
SECTION 2 : HEALTH HAZARD INFORMATION
|
Catalog No.: (N/A)
|
|
Emergency Overview:
|
Hazardous according to criteria of Worksafe Australia
|
|
Applies to All Ingredients:
|
|
Potential Health Effects:
|
Eyes: severe irritation; tearing skin, discoloration: drying; breathing: irritation, dizziness, unconsciousness (for solvent).
For isocyanates: coughing, irritation of mucous membranes and respiratory tract.
SKIN EFFECTS: Slight to moderate irritation; skin sensitizer in guinea pigs. No conclusive evidence has been developed to indicate that Glisten PC is carcinogenic, teratogenic or that it causes reproductive effects in animals or humans. Active resin in Glisten PC has been reported by NIOSH to be mutagenic to Salmonella Typhimurium bacteria in the presence of a mammalian liver activation system. There is not full agreement in the scientific community on the significance of these Ames test results and their relationship to human safety in assessing the risk of cancer in man.
|
|
Eye Contact:
|
HUMAN EFFECTS OF OVEREXPOSURE:
Liquid, vapors, or aerosols are irritating to the eyes and can cause lachrymation (tearing effect). Corneal damage can occur; however, indications are that the damage is reversible and does not result in permanent injury.
|
|
Skin Contact:
|
HUMAN EFFECTS OF OVEREXPOSURE:
Glisten PC reacts with skin protein and tissue moisture and can cause localized irritation as well as discoloration. Prolonged contact could produce reddening, swelling, or blistering and, in some individuals, skin sensitization resulting in dermatitis.
|
|
Inhalation:
|
HUMAN EFFECTS OF OVEREXPOSURE:
Inhalation of Glisten PC vapors in concentrations above 0.02 ppm can produce irritation of the mucous membranes in the respiratory tract, running nose, sore throat, productive cough and a reduction of lung function. Extensive exposures to concentrations well above the TLV could lead to bronchitis, bronchial spasm and pulmonary edema. These effects are usually reversible. However, due to low volatility, high exposures are not anticipated except if the material is overheated or sprayed as an aerosol into the air. Hypersensitivity pneumonitis has also been reported. Another type of response is hyperreactivity or hypersensitization. Persons with a preexisting unspecific bronchial hyperreactivity or persons with a specific isocyanate hypersensitivity (as a result of previous repeated overexposure or a single large dosage)will respond to small isocyanate concentrations at levels well below the TLV of 0.02 ppm. Symptoms could be immediate or delayed and include chest tightness, respiratory distress or asthmatic attack.
|
|
Ingestion:
|
HUMAN EFFECTS OF OVEREXPOSURE:
Ingestion could result in irritation and some corrosive action in the mouth, stomach tissue and digestive tract. However, it is not considered a common occupational route of exposure.
|
| |
THRESHOLD LIMIT VALUE:
For isocyanates: 0.02 ppm
For solvent: 200 ppm |
|
|
Eye Contact:
|
Immediately flush eyes with plenty of water for 15 to 20 minutes occasionally lifting eyelids. Get medical attention, if irritation or symptoms of overexposure persists.
|
|
Skin Contact:
|
Immediately wash skin with plenty of soap and water for 15 to 20 minutes, while removing contaminated clothing and shoes. Get medical attention if irritation develops or persists. Wash contaminated clothing thoroughly before re-use.
|
|
Inhalation:
|
If inhaled, remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Seek immediate medical attention if necessary. Asthmatic-type symptoms may develop and may be immediate or delayed up to several hours. Treatment is essentially symptomatic.
|
|
Ingestion:
|
If swallowed, do NOT induce vomiting. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.Give 250 ml of milk or water to drink. Consult physician.
|
|
Aromatic Solvent :
|
|
1,6-Hexamethylene Diisocyanate based Polyisocyanate :
|
|
Ethyl 3-ethoxypropionate :
|
|
Xylene :
|
|
|
SECTION 3 : PRECAUTIONS FOR USE
|
Catalog No.: (N/A)
|
|
Engineering Controls / Personal Protection / Flammability
|
|
Engineering Controls:
|
Use appropriate engineering control such as process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits.
|
|
Ventilation System:
|
Ventilation as required to maintain air concentrations below TLV's. If material is spray-applied, ventilation should be provided and air supplied respirators worn. Exhaust air may need to be cleaned by scrubbers or filters to reduce environmental contamination.
|
|
Personal Protective Equipment
Routine Handling:
|
SPECIAL PROTECTION INFORMATION:
RESPIRATORY PROTECTION: NIOSH/MSHA approved respirator.
EYE PROTECTION: Goggles or face mask.
VENTILATION: Use in well-ventilated areas only. Have adequate general exhaust.
PROTECTIVE GLOVES: Solvent protective gloves.
OTHER PROTECTIVE EQUIPMENT: Self-contained breathing apparatus if threshold limit is exceeded.
|
|
Skin Protection Description:
|
Cover as much of the exposed skin area as possible with appropriate clothing. If skin creams are used, keep the area covered to a minimum.
|
|
Hand Protection Description:
|
Wear appropriate protective gloves. Consult glove manufacturer's data for permeability data.
|
|
Eye/Face Protection:
|
Wear appropriate protective glasses or splash goggles as described by 29 CFR 1910.133, OSHA eye and face protection regulation, or the European standard EN 166. Contact lenses should not be worn.
|
|
Respiratory Protection:
|
A NIOSH approved air-purifying respirator with an organic vapor cartridge or canister approved for use in isocyanate containing environments may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. In spray applications you must protect against exposure to both vapor and spray mist. An air-supplied respirator is strongly recommended for spray application. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection.
|
|
Other Protective:
|
Eyewash and deluge shower should be available.
|
| |
|
|
|
Ingredient Guidelines
|
|
Ingredient: 1,6-Hexamethylene Diisocyanate based Polyisocyanate
|
|
Guideline Type:
|
OSHA PEL-TWA
|
|
Guideline Type:
|
ACGIH TLV-TWA
|
|
Guideline Type:
|
Australian Exposure Standard
|
Ingredient: Aromatic Solvent
|
Guideline Type:
|
OSHA PEL-TWA
|
|
Guideline Type:
|
ACGIH TLV-TWA
|
|
Guideline Type:
|
Australian Exposure Standard
|
Ingredient: Ethyl 3-ethoxypropionate
|
Guideline Type:
|
OSHA PEL-TWA
|
|
Guideline Type:
|
Australian Exposure Standard
|
|
Guideline Type:
|
ACGIH TLV-TWA
|
Ingredient: Xylene
|
Guideline Type:
|
ACGIH TLV-TWA
|
|
Guideline Information:
|
100 ppm
|
|
Guideline Type:
|
Australian Exposure Standard
|
|
Guideline Information:
|
100 ppm
|
|
Guideline Type:
|
OSHA PEL-TWA
|
|
Guideline Information:
|
100 ppm (435 mg/m3)
|
|
|
SECTION 4 : SAFE HANDLING INFORMATION
|
Catalog No.: (N/A)
|
|
Storage:
|
STORAGE TEMPERATURE (min/max): 32 deg F (0 deg C)/122 deg F (50 deg C)
AVERAGE SHELF LIFE: 12 months @ 77 deg F (25 deg C)
Store in tightly closed container. At maximum storage temperatures noted, material may slowly polymerize without hazard. Ideal storage temperature range is 50-81 deg F (10-27 deg C).
|
|
|
Chemical Stability:
|
Stable under normal conditions.
|
|
Conditions to Avoid:
|
Temperatures below 0°C (32°F) or above 50°C (122°F). To maintain freshness: Avoid contact with water, alcohols, amines, strong bases, metal compounds or surface active materials.
|
|
Hazardous Polymerization:
|
Will not occur under normal conditions.
|
|
Hazardous Decomposition Products:
|
(Typical of all paints): By fire, carbon dioxide, CO, oxides of nitrogen, traces of HCN, and elements unknown.
|
| |
|
|
Transportation Information:
|
FRT CLASS BULK: Isocyanate
|
|
DOT Shipping Name:
|
Paint or Paint related material
|
|
DOT UN Number:
|
UN1263
|
|
DOT Hazard Class:
|
3
|
|
DOT Packing Group:
|
III
|
|
Spill Cleanup Measures:
|
Eliminate source of ignition of vapors, wear protective clothing while cleaning up; absorb on sand, clay, or absorbent material.
|
|
Waste Disposal:
|
Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous waste prior to disposal. Furthermore, consult with your state and local waste requirements or guidelines, if applicable, to ensure compliance. Arrange disposal in accordance to the EPA and/or state and local guidelines. Triple-rinse drum prior to offering for recycle.
|
|
Fire:
|
Combustible liquid. At elevated temperatures, vapors can form an ignitable mixture with air. Vapors can flow along surfaces to distant ignition sources and flash back.
|
|
Flash Point:
|
51.1°C (124°F)
|
|
Flash Point Method:
|
TCC
|
|
Upper Flammable or Explosive Limit:
|
7%
|
|
Lower Flammable or Explosive Limit:
|
1%
|
|
Auto Ignition Temperature:
|
246°C (475°F)
|
|
Extinguishing Media:
|
Dry chemical (e.g. monoammonium phosphate, potassium sulfate, and potassium chloride), carbon dioxide, high expansion (proteinic) chemical foam, sand.
|
|
Fire Fighting Instructions:
|
Avoid spreading burning liquid with water for cooling purposes.
|
|
Protective Equipment:
|
As in any fire wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
|
|
Unusual Fire Hazards:
|
Keep work areas free of hot metal surfaces and other sources of ignition.
|
|
|
OTHER INFORMATION
|
Catalog No.: (N/A)
|
|
|
Aromatic Solvent :
|
|
1,6-Hexamethylene Diisocyanate based Polyisocyanate :
|
|
Ethyl 3-ethoxypropionate :
|
|
Xylene :
|
|
MSDS Revision Date:
|
07/02/2008 |
|
Disclaimer:
|
This Health and Safety Information is correct to the best of our knowledge and belief at the date of its publication but we cannot accept liability for any loss, injury or damage which may result from its use. We shall ensure, so far as is reasonably practicable, that any revision of this Data Sheet is sent to all customers to whom we have directly supplied this substance, but must point out that it is the responsibility of any intermediate supplier to ensure that such revision is passed to the ultimate user. The information given in the Data Sheet is designed only as a guidance for safe handling, storage and the use of the substance. It is not a specification nor does it guarantee any specific properties. All chemicals should be handled only by competent personnel, within a controlled environment.
Should further information be required, this can be obtained through the sales office whose address is at the top of this data sheet. We welcome any additional information about our products that customers have obtained by personal experience. |
|
References:
|
1. American Chemical Society, STN Easy Online Database
2. Brethericks Reactive Chemical Hazards Database. Version 2.
3. Gassarett and Doulls Toxicology, The Basic Science of Poisons.
4. Hawleys Condensed Chemical Dictionary, Thirteenth Edition
5. IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Man, WHO International Research on Cancer.
6. Industrial Hygiene and Toxicology, by F.A. Patty.
7. National Library of Medicine, Department of Health and Human Services, Hazardous Substances Data Bank (HSDB).
8. National Toxicology Program (NTP) Eighth Report on Carcinogens, 1997.
9. NIOSH Registry of Toxic Effects of Chemical Substances (RTECS) and Pocket Guide to Chemical Hazards.
10. OSHA Hazard Communication Standard, 1910.1200 and Z Tables.
11. Sax Dangerous Properties of Industrial Materials. Tenth Edition.
12. The Merck Index: An Encyclopedia of Chemicals and Drugs. Merck and Company. Twelfth Edition 1998.
13. Threshold Limit Values for Chemical Substances and Physical Agents in the Work Environmental and Biological Exposure Indices. TLV Booklet, 2001. |
|
